HS-360

Hydraulic Starter HS-360 model is built using a typical hydraulic gear motor and a common drive used with air starters. We offer several nose cones (drive housings) in order to accommodate any 50 liter or larger industrial engine displacements*, each versions has its own p/n depending on the engine side and pocket of installation

In terms of ports (SAE#16, in/out), this starter is offered either with rear ports or side ports. Weeping holes and case drain protections are standard for PRQ hydraulic starters. In addition we are offering an electric to hydraulic ON/OFF 24Vdc (or 12Vdc) valve for controlling the hydraulic starter operation.

*The engine displacements are for reference only, the engine and the application breakaway torque must be considered

• Engine displacement: 50L and above (consult factory for specific p/n and engine fit)
• Torque output: max. 200 ft-lbs (271 Nm)
• Pinion:  12 Tooth
• Rotation: Right Hand
• Operating Pressure: 1500-3000psi (103-206bar)
• Flow: 42-60 GPM (159 – 227 LPM)
• Temperature: -40°F(-40°C) to 180°F(-82°C)